Milling, Cutting, & Mixing
GRS supplies POWTEQ size reduction systems (ISO 9001 certified, CE-compliant) covering every reduction stage from jaw crushing through to planetary ball milling. The right input particle size is the foundation of reliable analytical data downstream.
Ball Mills
Planetary Ball Mill — BM40 / BM6Pro / NM-200 (Mini)
High-performance milling for soft, medium-hard, and brittle samples — dry, wet, or cryogenic. Reproducible results down to the sub-micron and nanometre scale.
Key Specifications:
Spec 1
- Feed Size: <10mm
- Final Fineness: <0.1μm
- Speed: 100-650rpm
Spec 2
- Feed Size: <5mm
- Final Fineness: <0.1μm
- Speed: 150-1100rpm
Mixer Mill / Tissue Homogenizer — GT300
Vibratory ball mill for small-quantity samples: plant material, animal tissue, chemical compounds. Dry, wet, or frozen.
Key Specifications:
Spec 1
- Feed Size: <10mm
- Final Fineness: <5μm
- Speed: 180-1800rpm
Spec 2
- Feed Size: <10mm
- Final Fineness: <100nm
- Speed: 180-2100rpm
3D Mixer Mill — M-10
Three-dimensional mixing and milling for small sample volumes requiring thorough, contamination-free blending.
Key Specifications:
Spec 1
- Speed: 20-100rpm
- Volume: 2L
- Time Setting: 00: 01-99: 59 (hr/min)
Cutting & Crushing Mills
Cutting Mill — CM 100
Cutting and shearing for soft, medium-hard, fibrous, and elastic samples — feeds, animal tissue, polymers, textiles.
Key Specifications:
Spec 1
- Feed Size: <25mm
- Final Fineness: 0.1-20mm
- Speed: 500-4000rpm
Centrifugal Fast Mill — FM 200
Rapid fine grinding for soft to medium-hard materials including plastics, rubber, cotton, and fibrous samples. Compatible with liquid nitrogen for cryogenic milling.
Key Specifications:
Spec 1
- Feed Size: <10mm
- Final Fineness: <40μm
- Speed: 18000rpm
Jaw Crusher — JC5
Coarse pre-crushing of hard, brittle, and tough materials: rocks, ores, alloys, ceramics, slag. The first step in bulk-to-fine reduction.
Key Specifications:
Spec 1
- Jaw Crusher: <90mm
- Final Fineness: <2mm
- Speed: 305rpm
Spec 2
- Feed Size: <220*90mm
- Final Fineness: <2mm
- Collector Capacity: 10L
Specialty Grinders
Vibratory Disc Mill — VM 3
Fast grinding of medium-hard and brittle materials to analytical fineness — suited to spectral analysis sample prep where minimal sample loss matters.
Key Specifications:
Spec 1
- Feed Size: <20mm
- Final Fineness: <75μm
- Speed: 700-1500rpm
Mortar Grinder — MG200
Motorised mortar and pestle for fine grinding or mixing of hard, soft, brittle, or pasty samples — pills, grains, soil, glass, biological tissue.
Key Specifications:
Spec 1
- Feed Size: <10mm
- Final Fineness: <5μm
- Speed: 50-130rpm
Industries Using This Equipment
- Food Safety
- Battery
- Recycling & Environmental
- Forensics & Security
- 2D & Energy Materials
- Pharmaceutical R&D
Why GRS for Milling, Cutting & Mixing
- Authorised POWTEQ distributor — ISO 9001 and CE-compliant equipment
- Full coverage from jaw crusher to nanometre-scale ball mill
- Factory-trained engineers for setup, training, and calibration
- Singapore-based spare parts and service support